Ray tracing Impact (0dB when using DLL/GLL Arrays) |
Posted: Sun Oct 12, 2014 6:48 pm |
|
|
jcejalvo |
Member |
|
|
Joined: 18 May 2005 |
Posts: 4 |
Location: Madrid, Spain |
|
|
|
|
|
| Hi again,
Working in the same project, that my last post, I get stacked in another issue and maybe you could help me (an others with the same problem) throug this way. Thanks in advance
Using a couple of Meyersound arrays for L and R and just individual loudspeaker from the same brand for the Center and frontfill. When I do ray tracing impact I get plenty of rays from all the loudspeakers, but all of them coming from the arrays are 0dBs level. When I check ecogram etc I only get rays and info from the singles loudspeakers (center and frontfill).
Any special adjust need to be made with DLL/GLL for Ray tracing?
I have checked everything f to be sure is not an easy mistake by myself but I can not fix it (order, time , number of rays per loudspeaker seems to be ok). I also read old message at the forum just in case somebody had same problem, but dind´t find any thing similar...
Thanks in advance for your great help
Best regards
Julio |
|
|
|
|
Posted: Tue Oct 14, 2014 1:26 pm |
|
|
|
| Hi Julio,
if possible please send your EASE project to the AFMG technical support (support@afmg.eu) for checking.
Best Regards
Frank Siegmann
AFMG |
|
|
|
|
Posted: Tue Oct 14, 2014 9:04 pm |
|
|
jcejalvo |
Member |
|
|
Joined: 18 May 2005 |
Posts: 4 |
Location: Madrid, Spain |
|
|
|
|
|
| Hi Frank,
Thanks in advance for your help and your interest!!
I´have just sent the project
Bet Regards
Julio |
|
|
|
|
AFMG Network Forum Index -> EASE 4 |
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
|
All times are GMT
Page 1 of 1
|
|
|
|