AFMG Network Forum
AFMG Network Forum Index -> AFMG SysTune -> about Impedance measurement?
Post new topic  Reply to topic View previous topic :: View next topic 
about Impedance measurement?
PostPosted: Sun Jan 01, 2017 4:44 pm Reply with quote
wjs
Member
 
Joined: 31 Dec 2016
Posts: 3




hello all
How to connect the measuring circuit when measuring the loudspeaker impedance curve with systune?
how diy my test box for systune Impedance measurement?[/b]
View user's profile Send private message
PostPosted: Tue Jan 03, 2017 9:43 am Reply with quote
AFMG Frank Siegmann
Member
 
Joined: 18 Jul 2005
Posts: 236




Hello,

did you already read chapter 5.12. Impedance of the SysTune Manual?

Frank Siegmann
AFMG
View user's profile Send private message
PostPosted: Tue Jan 17, 2017 4:27 am Reply with quote
wjs
Member
 
Joined: 31 Dec 2016
Posts: 3




yes
but there is no test wiring diagram in the manual. How to connect?
View user's profile Send private message
PostPosted: Tue Jan 17, 2017 8:45 am Reply with quote
Waldemar
Member
 
Joined: 05 Dec 2005
Posts: 112




Charlie's text is for EASERA, but it is correct for SysTune as well.
http://www.prosoundtraining.com/site/wp-content/uploads/2010/01/nl073_impedancemeasurement.pdf

_________________
Best Regards
SDA, Waldemar Richert
View user's profile Send private message
PostPosted: Thu May 25, 2017 5:44 pm Reply with quote
LulaNord
Member
 
Joined: 25 May 2017
Posts: 1




Hi...i am a new user here.I need to measure my speakers impedance. Is there a simple method?
I am thinking about sending a tone with 1 volt amplitude and mesure current. I could then calculate impedance for that frequency with Ohm Law. V=Z*I Then, i would repeat for many different frequencies.
Will that work? I have read method about constant voltage or constant current. But the method above is so simple, why do it differently.

circuit assembly


Last edited by LulaNord on Fri Jun 23, 2017 8:06 pm; edited 1 time in total
View user's profile Send private message
PostPosted: Fri May 26, 2017 2:51 pm Reply with quote
AFMG Pedro Lima
Forum Moderator
 
Joined: 05 Jun 2010
Posts: 266
Location: Germany




Hi,

You can try and check if it is worthwhile the time you spend.

The updated article from Charlie Hughes can be found here:
http://www.excelsior-audio.com/Publications.html

HTH,
Pedro
View user's profile Send private message
AFMG Network Forum Index -> AFMG SysTune
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
All times are GMT  
Page 1 of 1  

  
  
 Post new topic  Reply to topic  


Powered by phpBB © 2001-2003 phpBB Group
Theme created by Vjacheslav Trushkin
Variation by CodeWeavers and AFMG